Our Gutter Services
in Connecticut

Yes. Every gutter project starts with a free estimate. Call (203) 856-2794 or fill out the form on this page, and we'll reach out to set it up. There's no obligation to move forward.

We work in Connecticut and a few nearby communities in New York. Not sure your home is in our area? Call us with your ZIP code and we'll confirm it right away.

It depends on your roof area, roof pitch, and how much water reaches each gutter run. Many homes do fine with standard 5-inch gutters, while large or steep roofs often need 6-inch gutters and bigger downspouts.

Connecticut gets heavy rain, snowmelt, and freeze and thaw cycles. Without working gutters, that water hits your siding and soaks the soil by the foundation. It can end up in the basement or behind your walls.

Usually after, or at the same time. Roof work often means taking gutters down to install drip edge and flashing. Planning both together saves you from paying to remove and rehang new gutters later.

In most cases, yes. They have far fewer joints than sectional gutters, so there are fewer spots to leak or come apart. They also hold up better under Connecticut snow and ice when they’re hung and pitched correctly.

Seamless gutters are formed from a continuous coil of metal with a gutter machine. Each piece is cut to the exact length of the roof edge it covers. The only joints are at corners and downspout outlets.

Look for sagging runs, rust, leaks at several seams, and water spilling over the edge during normal rain. If you’re dealing with more than one of these at once, replacement usually costs less than repeated repairs.

Sometimes. If one run is damaged and the rest of the system is in good shape, replacing that run can work. If most of the gutters are aging, a full seamless replacement is the better long-term fix.

Yes, in many cases. The old sealant is cleaned out and the joint is resealed or refastened. If the same seam keeps failing, or several seams leak at once, seamless gutters may be the smarter move.

The most common causes are failed hangers, heavy ice or debris, and soft wood in the fascia behind the gutter. A repair can refasten the gutter, but rotted fascia has to be addressed first.

Most homes do. Without gutters, roof water drops straight onto the ground next to the house. Over time that can wear away soil, splash dirt onto your siding, and send water toward the foundation and basement.

Yes. Any roof edge that drops water where you don’t want it can get gutters. Garages, porches, sheds, and additions are common spots where a short gutter run and one downspout solve the problem.

It depends on roof size and gutter length. A long run usually needs a downspout at each end. Large or steep roofs often need extra downspouts so water doesn’t back up during heavy rain.

Downspouts should release water several feet away from the house, on ground that slopes away from the foundation. Extensions or elbows help get it there without flooding walkways, driveways, or planting beds.